Scrap aluminum recycling often contains organic non-metallic impurities such as paints, oils, plastics, and rubber. Before returning to the furnace for smelting, it must be removed. For wire scrap aluminum, measures such as mechanical grinding or shear stripping, heating stripping, and chemical stripping can generally be used. At...
Production process of aluminum alloy doors and windows includes casting preparation, extrusion molding, heat treatment, surface treatment. Casting preparation The process includes the main steps of batching, smelting, casting, soaking and so on to form an ingot with a certain chemical composition and shape. The prepared raw materials...
40 ppi Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. Segregation of chemical components in ingots The phenomenon...
30 ppi CFF material filtration and purification mechanism 1. Mechanical screening through inertial collision interception and diffusion interception, friction, sedimentation, etc. The filtration efficiency is proportional to the pore size of the foam ceramic mesh. The smaller the mesh, the stronger the ability to intercept small...
20 ppi Cff for efficient deep slag removal technology Research and development of low-cost, easy-to-operate ultra-fine pore size, high-strength ceramic foam filter plates that do not drop ceramic particles (such as Adtech Cff), and researched the patented technology of two-stage filtration of deep filter residue. 20 Ppi...
Filter Zirconia is used for aluminum alloy melt filtration and purification Inclusions and gases in the metal have a significant impact on the material's strength, fatigue resistance, corrosion resistance, stress corrosion cracking performance, etc. Effectively controlling the oxidized inclusions in the melt to improve the quality of...
Molten Aluminium Cff and aluminum ingot production What is aluminum ingot? Aluminum, the raw material in our daily industry is called aluminum ingot, which should be called "aluminum ingot for remelting" according to Chinese standard (GB/T1196-93), but everyone is used to "aluminum ingot". It is produced by electrolytic...
Molten Aluminum Cff is the most effective and reliable means to remove non-metallic inclusions in aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it...
Casthouse Filter and two key issues of aluminum casting Two key issues of aluminum casting 1. The mechanical properties of single-cast test rods cannot fully reflect the quality of the smelting quality. The performance of the single-cast test bar can only represent part of the melting quality...
Aluminium Alloys Filtration is used for the filtration of molten aluminum and non ferrous alloy. Alumina Foundry Foam Filters mainly for filtration of aluminum and alloys in foundries and cast houses .With the excellent resistance to attack and corrosion from molten aluminum, the filter can effectively...