Rusal Aluminum Casting Flux from China to Confront USA

11 4月 Aluminum Casting Flux

Posted at 02:09h in News by admin 0 Comments

0 Likes

Aluminum Casting Flux

AdTech Aluminum Casting Flux is a white (slightly gray) powdery fine particle with a major component of chloride and fluoride and other compounds.
After proper heat treatment and sieving, the particle size is uniform, which is beneficial to the uniformization of the refining tank under the action of carrier gas (N 2 or Ar) into the lower layer of aluminum liquid, and the formation of numerous small bubbles and aluminum liquid in the aluminum liquid through physical and chemical changes. Full contact, separation of [H] and other harmful gases in the aluminum liquid.
At the same time, some substances contained in Aluminum Casting Flux can strongly adsorb and melt the oxides and suspended solids in the melt and adhere to the bubbles together, and bring them to the surface of the aluminum liquid as the bubbles rise, thereby achieving degassing and slag removal, etc. The purpose of refining and purifying.
Aluminum Casting Flux is environmentally friendly and economical, and it is suitable for the production of high-value-added, high-tech aluminum alloy precision casting such as aviation and transportation. Such as: computer hard disk, micron aluminum foil wool, printing PS board base, cans, jet turbine engine fan blades and other products.

Refining Flux Aluminum Casting Flux

Aluminum Casting Flux product advantages
AdTech Aluminum Casting Flux uses a combination of metal liquid compounds to develop and configure products to reduce smoke, reduce burnout, and protect the economy.
AdTech Aluminum Casting Flux solves the problem of refining effect in the traditional use of a large amount of aluminum ash, AdTech Aluminum Casting Flux tons of aluminum 1.5-2.0kg, discharge aluminum ash 0.8-1%, and achieve high-precision aluminum alloy casting Requirements, effectively improve the yield of metal liquid 0.6-0.8%, to achieve energy saving and consumption reduction purposes.
AdTech Aluminum Casting Flux is properly heat treated and sieved, and the particle size is uniform, which is beneficial to the uniformization of the refining tank under the action of carrier gas (N 2 or Ar) into the lower layer of aluminum liquid, which fully solves the traditional blocking and failure. Uniform dispersion is not conducive to ensuring casting quality and other issues.

Aluminum Casting Flux effectively removes slag, metal and non-metallic inclusions in molten metal, improves casting quality, is easy to use, has obvious degassing effect, and the slag after refining is easily removed. Prove that the larger the gas content, the degassing effect is obvious, the degassing effect is more obvious.

Aluminum Casting Flux Storage Requirements
25 kg of carton or 50 kg of paper drum, sealed with inner moisture-proof membrane, 25±0.5kg of net weight per piece, or 50±0.5kg (with small bag inside), can also produce various shapes according to user requirements. The packaging method should be stored in a dry warehouse to prevent moisture and not be effective for long-term exposure.

Aluminum Casting Flux Packing: 2-5kg/bag, 25kg/carton, 1T/tray
1. Store in a dry and ventilated place to prevent moisture.
2. If it is damp, it can be dried at 150 °C. It can be used after passing through the 12 mesh screen, but the effect will be affected.
3. The refining agent is stored in a place with good ventilation, cool and dry. Shelf life: 12 months