20 5月 Casting Filter Australia
Casting Filter Australia has the characteristics of corrosion resistance, high temperature resistance, high mechanical strength, no elution of harmful substances, and no secondary pollution.
Under the action of fluid pressure, the micropores are not deformed, easy to clean and regenerate, and have a long service life. Widely used in environmental protection of metallurgical enterprises.
Casting Filter Australia adopts a new precipitation + microporous ceramic filter new process, novel design, simple structure, economical and practical, the removal rate of suspended matter reaches more than 97%.
The removal rate of COD is over 95%, and the concentration of suspended solids in the effluent is generally about 10-50mg, all of which meet the first-level discharge standards.
Adtech specializes in Casting Filter Australia. Its leading products are: high temperature resistant filter materials, etc., used in the aluminum processing industry, such as rod making, automobile wheels, automobile parts processing, etc.
After long-term development and innovation, the company has formed a series of products such as aluminum filter plates, filter caps, insulation caps, aluminum runners and so on. Praised by the aluminum processing industry.
The company has strong technical force and perfect quality assurance system. It is a company that can completely reassure users.
We will serve the majority of users based on integrity.
Working temperature ≤1200 ° C
Porosity 80 ~ 90%
Compressive strength (room temperature) ≥ 1.0 MPa
Bulk density ≤0.5 g / cm3
Thermal shock resistance 800 ° C
5 times at room temperature for malleable cast aluminum, aluminum alloy and non-ferrous metal, flue gas absorption, sound absorption material, catalyst carrier and environmental protection Casting Filter, special filler, etc.
The eight elements that affect the performance of aluminum alloys are: vanadium, calcium, lead, tin, bismuth, antimony, beryllium and sodium and other metal elements. Due to the different uses of the finished aluminum coil, the impurity elements added during processing are these impurity elements. Because the melting points are different, the structure is different, and the compounds formed by aluminum are also different, so the impact on the performance of aluminum alloys is also different.
Sorry, the comment form is closed at this time.