Ceramic foam filter Canada uses polyurethane foam as a carrier, filled with ceramic slurry made of refractory aggregate sintering aids, binders and other fine powders and water, and then squeezes the slurry Ceramic material around the foam fiber. After drying, firing and sintering at high temperature, the...
Ceramic Foam Filter Rusal uses the formulas and processes of many well-known foreign companies. It has been carefully developed by introducing foreign production equipment and some raw materials. Its performance fully meets or exceeds the level of similar foreign products. Ceramic Foam Filter Rusal product function It can...
Ceramic Foam Filter Norway Manufacturer provides the basic process of recycling aluminum scrap. Preparation of scrap aluminum First of all, the primary classification of waste aluminum, graded stacking, such as pure aluminum, deformed aluminum alloy, cast aluminum alloy, mixture and so on. For waste aluminum products, they should...
Ceramic Foam Filter Denmark is currently the most effective tool for removing oxidized inclusions in aluminum melts. Aluminum alloy melt purification technology is the most effective method to improve the quality of cast rods, and is also the common goal of aluminum industry casting. Use and selection...
Ceramic Foam Filter Nordic effectively removes harmful impurities such as bubbles, ash oxides, and various inclusions in the metal melt, thereby fundamentally eliminating the gas holes, slag holes, and sand holes in the casting, greatly improving the yield of the casting and improving the casting...
Ceramic Foam Filter Sweden is purchased from Adtech China, please contact email: sales@adtechamm.com Aluminum alloy castings are more and more widely used in the development of the automotive industry, and the requirements for castings are becoming higher and higher. Therefore, the added value of aluminum alloy...
Ceramic Foam Filter Iceland consists of many uniform micropores. When the fluid passes through these small holes, suspended substances, colloidal particles and macromolecular organic matter are trapped on the surface of the filter medium. The fluid generates various physical effects through the micropore channels, and realizes...
Casting Filter Australia has the characteristics of corrosion resistance, high temperature resistance, high mechanical strength, no elution of harmful substances, and no secondary pollution. Under the action of fluid pressure, the micropores are not deformed, easy to clean and regenerate, and have a long service life....
Foundry Filter Australia filters out the inclusions in the casting, reduces the gas in the casting, reduces the degree of turbulence in the metal flow during the filling process, reduces the surface defects of the casting, and significantly reduces the scrap rate of the casting. Foundry...
Molten Metal Filtration Australia is a new type of industrial ceramic product with low bulk density (0.25-0.65) g / cm3, high porosity (60-90%) and three-dimensional network skeleton structure. It has the characteristics of high temperature resistance, chemical corrosion resistance, interpenetration and large specific surface area. Widely...