Ceramic Foam Filter Molten Aluminium Filtration

21 2月 Ceramic Foam Filter Molten Aluminium Filtration

Posted at 08:28h in Ceramic Foam Filter by admin 0 Comments

0 Likes

Ceramic Foam Filter Molten Aluminium Filtration is used to remove the inclusions generated between the refining system and the mold table.
The ability of the ceramic foam filter to capture these inclusions is critical to maintaining a clean ingot during the metal solidification process.
Therefore, the quality and productivity of downstream operations such as forging, extrusion and rolling are guaranteed.
For ceramic filter prices, please contact sale@adtechamm.com

Aluminum is silver-white light metal. There is malleability.
Commodities are often made into columns, rods, sheets, foils, powders, ribbons and filaments.
It can form an oxide film to prevent metal corrosion in humid air.
The acid-treated aluminum powder can burn violently when heated in the air and emit a dazzling white flame.
It is easily soluble in dilute sulfuric acid, dilute nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solution, insoluble in water, but can slowly react with hot water to form aluminum hydroxide.
The relative density is 2.70, the elastic modulus is 70Gpa, and the Poisson’s ratio is 0.33.
The melting point is 660°C and the boiling point is 2327°C.
It is widely used for its light weight, good electrical and thermal conductivity, high reflectivity and oxidation resistance.

Ceramic Foam Filter Molten Aluminium Filtration

At AdTech, the constant pursuit is to ensure that our customers have access to the best technology available on the market to produce the highest quality aluminum billets, billets or ingots for their customers.
Our guarantee will not stop at our customers, but will continue to our customers’ customers!
Our technology ensures the consistency of casting quality for the most critical final product applications.
For ceramic filter prices, please contact sale@adtechamm.com

The filtration efficiency of Ceramic Foam Filter Molten Aluminium Filtration is closely related to its correct installation and use.
At the same time, due to the filtration process, the conventional and necessary measures taken to reduce the generation of inclusions in process operations such as smelting, furnace treatment and casting cannot be ignored. It is also necessary to prevent re-contamination of the filtered clean aluminum liquid.