Manufacture Porous Alumina Ceramic Foam Filter

16 7月 Manufacture Porous Alumina Ceramic Foam Filter

Posted at 02:58h in News by admin 0 Comments

0 Likes

Manufacture Porous Alumina Ceramic Foam Filter

Manufacture Porous Alumina Ceramic Foam Filter uses a three-dimensional network structure and an organic foam sponge connected to the pores as a carrier, invading it into a special ceramic slurry with thixotropic properties, and adopting a special roll extrusion process to uniformly apply the ceramic slurry to the skeleton of the carrier.
Then, it is dried and solidified and then fired at a high temperature.
Porous Ceramic Foam Filter Foam Ceramic Filters for Aluminum Alloys Since the first research in 1978, foam ceramic filtration technology has developed rapidly.
Porous Ceramic Foam Filter uses polyurethane foam as a carrier, immersing it in a coating made of ceramic powder, binder, sintering aid, suspending agent, etc., and then extruding excess coating to uniformly apply the ceramic coating to the carrier.
The skeleton becomes a green body, and the green body is dried and fired at a high temperature.

Features of Manufacture Porous Alumina Ceramic Foam Filter
Ceramic Foam Filter can effectively remove large inclusions in aluminum liquid and adsorb micron-sized fine inclusion particles to improve surface quality, improve product performance, improve microstructure and improve yield.
It is widely used in the production fields of aluminum profiles, aluminum foils, and aluminum alloys.

Manufacture Porous Alumina Ceramic Foam Filter

The Points of Manufacture Porous Alumina Ceramic Foam Filter
Structural characterization of specific reactions in pore size, pore distribution, pore shape and porosity;
The pore structure of the membrane is closely related to its filtration transfer performance.
The pore size and pore size distribution are the most important parameters of the membrane structure, which directly affect the transfer characteristics of the fluid in the membrane and determine the separation and filtration performance of the membrane surface.

The quality of Manufacture Porous Alumina Ceramic Foam Filter in the smelting of aluminum melts is important, which greatly affects the subsequent processing properties and the quality of the final product.
Therefore, all countries in the world attach great importance to the purification of aluminum melt; there are many reasons for aluminum pollution.
On the one hand, during the smelting process, aluminum is exposed to the furnace atmosphere in a molten or semi-molten state, which is prone to oxidation and easily reacts with water vapor. Hydrogen is easy to form various forms of non-metallic slag, as well as coarse intermetallic particles and the like.
On the other hand, part of the waste material in the composition charge carries some non-aluminum impurities during the circulation.
Since the waste comes from the process waste and waste of the various processes of the factory and the waste outside the factory, the route is different, the composition is complex, and the quality is also poor.
These impurities tend to cause bubbles and inclusions in the slab, which seriously affect the purity of the metal melt, thereby further affecting the processing properties, mechanical properties, corrosion resistance and appearance quality of the product.

Manufacture Porous Alumina Ceramic Foam Filter can effectively remove all kinds of fineness in the aluminum water to the micron-sized inclusions, so that the aluminum water becomes a smooth laminar flow, which is favorable for filling.
It has a unique corundum structure, good mechanical strength and chemical stability, superior aluminum washability; tightly controlled hole size and through-hole ratio for stable filtration.

Ceramic filter plate is surrounded by a sealed ceramic fiber gasket, which helps the filter plate to seal in the filter box, ensuring no metal loss.
This product is mainly used in the purification process of aluminum and aluminum alloy production.