21 12月 Molten Aluminum Filter Aluminium Coimbatore
Molten Aluminum Filter Aluminium Coimbatore is used to filter molten aluminum. A mesh foam filter that uses alumina aggregate particles in the binder stage is usually used to filter aluminum and aluminum alloys.
Usually, the molten aluminum is mixed with inclusions, especially non-metallic inclusions.
If such molten metal is rolled after casting or the like and is made into a disc-shaped material such as a product without removing the inclusions from the molten metal, the non-metallic inclusions mixed therein may cause defects such as pinholes. Therefore, it is necessary to use Molten Aluminum Filter Aluminium Coimbatore.
In order to avoid this defect, the usual method is to use molten metal filter media to remove inclusions.
The oxygen partial pressure is maintained in the interstitial space of the filter to reduce the reactivity between the ceramic filter and the oxide constituting aluminum or aluminum alloy.
The aerospace, electronic communications and food packaging industries have strict requirements on the quality of aluminum products. For example, even if there are some surface defects that have a major impact on it, molten aluminum should be removed as much as possible from the tiny inclusions of the alloy material.
The aluminum water secondary purification equipment is equipped with two filter chambers at the bottom of the filter chamber.
In the first chamber, the impurity coating of the molten aluminum is removed, and the molten metal is supplied to the die casting to keep the second chamber clean.
The molten aluminum flows into the filter chamber through the first chamber and enters the second chamber.
Almost no molten metal oxide is formed.
The aluminum liquid purification equipment consists of a rod heater, which can keep the temperature of the molten metal within a strictly controlled range. Therefore, the impurities can be effectively removed from the molten metal by the easy-to-replaceable filter.
No Comments