Degassing Mixer with 3 Rotors is specially designed to provide online degassing for those launders with large molten aluminum flow, high gas content and many inclusions. With three stirring rotors that can independently control the speed and gas flow, it can provide a strong degassing refining...
Deslagging Machine is an important equipment to remove the hydrogen content, inclusions and alkali metals in molten aluminum. The solubility of hydrogen in molten aluminum is very high, which will reduce the physical properties and machining performance of castings. To cast high-quality castings, the hydrogen content...
Hydrogen Removal Machine is an on-line degassing equipment designed and produced independently for the removal of hydrogen and purification of molten aluminum. The degassing box body is integrally cast and sintered with high-strength imported castable, which has good thermal shock resistance. The insulation layer on the outside...
Molten Aluminum Purify is usually installed between the furnace discharge port and the filter box. The melt flows into the box of the degassing device, and the inert gas is broken by rotating the rotor to form a large number of dispersed bubbles into the aluminum...
Slagging Equipment adopts a compact furnace body design. In the degassing box, a rotating nozzle is used to degas the molten aluminum, forming convection in the box, so that small bubbles can be fully diffused in the molten aluminum. The contact surface between bubbles and molten...
Deslagging equipment uses inert gas with a purity of 99.99% to remove hydrogen and slag from molten aluminum. The rotating silicon nitride rotor breaks the ammonia (or argon) blown into the aluminum water into a large number of dispersed bubbles and disperses them in the molten...
Slag machine is a rotating rotor degassing device equipped with an imported hydraulic lift to measure the temperature of molten aluminum online. The degassing medium adopts 99.996% argon or nitrogen, and its principle Install the silicon nitride rotor on the degasser and place it in the aluminum...
Molten Aluminum Purifier rotates at a high speed through a silicon nitride rotor, and sprays inert gases (argon and nitrogen) to make it evenly dispersed in the molten aluminum alloy liquid. The diameter of inert bubbles will decrease, but the total surface area of the bubbles...
Aluminum Refining Machine uses 99.99% argon or nitrogen as the degassing medium to remove aluminum slag and hydrogen from molten aluminum. working principle After the silicon nitride rotor of the degasser is placed in the aluminum liquid, the metered inert gas is pressed into the aluminum liquid...
Aluminum Slag Remover uses a rotor to blow inert gas (argon or nitrogen) into molten aluminium to break them into a large number of dispersed bubbles and disperse them in the aluminum liquid. Bubbles in the melt rely on the gas partial pressure difference and the...