The difference between 6061 and 6063 aluminum alloy

02 2月 The difference between 6061 and 6063 aluminum alloy

Posted at 02:31h in News by admin 0 Comments

0 Likes

The difference between 6061 and 6063 aluminum alloy

1. The difference between 6061 and 6063 aluminum alloy

Answer: 6061 has more alloying elements than 6063. The main alloying elements of 6063 aluminum alloy are magnesium and silicon. It has excellent processing properties, excellent weldability, extrudability, electroplating properties, good corrosion resistance, and toughness. It is easy to polish, coated with film, and excellent anodizing effect. It is a typical extruded alloy. Widely used in building profiles, irrigation pipes, for vehicles.

2. Can aluminum alloy 6061 be cast?

Answer: 6061 is a wrought aluminum alloy with poor casting performance, so it cannot be cast. Aluminum alloy is divided into two types: deformed aluminum alloy and cast aluminum alloy; the former can be used for pressure processing, and the latter can only be cast. Advantages of aluminum alloy: (1) Aluminum alloy is light in weight, corrosion resistant, and well processed. (2) Aluminum alloy has good thermal conductivity and electrical conductivity.

3. What material is AL6061

Answer: AL6061 is made of aluminum alloy because aluminum alloy has excellent plasticity so it can be extruded to manufacture profile radiators. Almost any shape of the radiator can be manufactured with mature technology, low price, and high processability. If you add some alloying elements to aluminum, and then undergo cold working or heat treatment.

4. What is the difference between aluminum alloy ly2 and 6061

Answer: Difference; The composition is different, and the performance is different. Material name: 2A02 Old name: LY2 Standard: YS/T 439-2001 Features and scope of application: This is an alloy with higher strength in duralumin, and its characteristics are: at room temperature It has high strength and high thermal strength, and belongs to heat-resistant duralumin. The alloy has high plasticity during hot deformation. In the extruded semi-finished product.

5. What is the corresponding grade of 6061 aluminum alloy?

Answer: National standard number: 6061 (LD30) GB/T 3190-1996 6061 aluminum alloy basic introduction 6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process, although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics, excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, toughness.

What is the difference between 6.6063 aluminum alloy and 6061 aluminum alloy?
Answer: The main alloying elements of 6063 aluminum alloy are magnesium and silicon, which have excellent processing properties, excellent weldability, extrudability, and electroplating properties, good corrosion resistance, toughness, easy polishing, coating, and anodizing effects. It is a typical extruded alloy. It is widely used in building profiles, irrigation pipes, pipes for vehicles, benches, furniture, elevators, fences, etc.

7. Regarding the hardness of 6061 aluminum alloy.

Question: I want to buy it as a prop, but I don’t know how thick it should be. (The thinnest in the shop is 2mm) .

8. What is the difference between aluminum alloy 6061 and 6063 in terms of characteristics?

Answer: 6061 requires a certain degree of strength, weldability, and high corrosion resistance in industrial structural parts. 6063 is generally used for building profiles. One, 6061, 6063, and 6063A refer to the grades of aluminum alloys, that is, their types, three All of them belong to the Al-Mg-Si series of aluminum alloys, and their main alloying element contents are different, and the mechanical properties of 6061 are the highest, and there is not much difference between 6063 and 6063A. Second.

The difference between 6061 and 6063 aluminum alloy